Appleby Creek Erosion Control Class EA

The City of Burlington hired Aquafor Beech Limited to do an Erosion Control Class Environmental Assessment (Class EA) Study for the section of Appleby Creek between South Service Road and Lake Ontario.

Study Objective

The objective of the study is to provide recommendations to reduce erosion and protect the natural heritage in the area.

This study must follow the requirements of the Ontario Environmental Assessment Act as a project that will follow the Municipal Class Environmental Assessment 'Schedule B' process. Through this process, the existing conditions and problems will be fully documented.

The Class Environmental Assessment will recommend a set of alternative solutions that will be evaluated and presented to the public and agencies for comments.

Public Engagement

We would like to hear from you about this study. Comments and information about the study are being collected to help the City of Burlington to meet the requirements of the Environmental Assessment Act.

This material will be kept on file for use during the study and may be included in study documentation.

Public Consultation

A key part of the study was consultation with you: the public, landowners and regulatory agencies. The Public Information Centre (PIC) presented the potential solutions and progress made for the study at that time. The PIC was held Tuesday, February 19, 2019. Thank you to everyone who attended.

Documents and Reports

Contacts

Arif Shahzad, M.Eng, P.Eng.
Senior Project Manager
Engineering Services - Development and Stormwater Management
905-335-7600, ext. 7486
arif.shahzad@burlington.ca

Teresa Giangregorio, CET
Stormwater Management Technologist
Engineering Services - Development and Stormwater Management
905-335-7600, ext. 7891
teresa.giangregorio@burlington.ca

Robert Amos, MASc., P. Eng.
Aquafor Beech Ltd. - Project Manager
2600 Skymark Ave., Mississauga, ON L4W 5B2
905-629-0099, ext. 284
Amos.r@aquaforbeech.com

Subscribe Back to Environmental Assessments Projects

Contact Us


Design and Construction - Requirements
426 Brant St., PO Box 5013
Burlington, ON  L7R 3Z6

Phone: 905-335-7777
Email Design and Construction - Requirements